Herb Mill

[Dooby Doo]

I just found this on AliExpress:
￡21.62 | New 55MM Toothless Manual Metal Herb Grinder Spice Crusher Large-capacity Portable Toothless Design Transparent Screen Catcher

New 55MM Toothless Manual Metal Herb Grinder Spice Crusher Large-capacity Portable Toothless Design Transparent Screen Catcher - AliExpress 15

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

 

[Dooby Doo]

I just found this on AliExpress:
￡21.62 | New 55MM Toothless Manual Metal Herb Grinder Spice Crusher Large-capacity Portable Toothless Design Transparent Screen Catcher

New 55MM Toothless Manual Metal Herb Grinder Spice Crusher Large-capacity Portable Toothless Design Transparent Screen Catcher - AliExpress 15

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

It's reduced to £9.50, i know it's cheap but has anyone had one?

 

[joint_account]

I've never used anything like a flower mill but toothless grinders can be really good!

 

[Dooby Doo]

I've never used anything like a flower mill but toothless grinders can be really good!

I've bought it to just see if there is any difference between a normal grinder and this mill. It'll be interesting to see what the difference is between the 2.

 

[GrownHealth]

I've bought it to just see if there is any difference between a normal grinder and this mill. It'll be interesting to see what the difference is between the 2.

A lot less effort needed with a mill I find but not as fine a grind and probably a place for both of them depending on the bud your using and the result you want .

 

[Dooby Doo]

A lot less effort needed with a mill I find but not as fine a grind and probably a place for both of them depending on the bud your using and the result you want .

Hopefully it's easier on my upper spine and eases the coat hanger pain. I don't know how it will effect the Ruby's performance and my other vapes but I'll find out in about a weeks time . I didn't like the idea of paying £50-100 for the mill so went for this one as its does the same job but probably won't last as long but we'll see

 

[GrownHealth]

Hopefully it's easier on my upper spine and eases the coat hanger pain. I don't know how it will effect the Ruby's performance and my other vapes but I'll find out in about a weeks time . I didn't like the idea of paying £50-100 for the mill so went for this one as its does the same job but probably won't last as long but we'll see

We got a decent sized one for about £14 thinking back and it was in a thread on here but went out of stock not long after but is a good enough snide version.

 

[Dooby Doo]

Just recieved this Mill today, 55mm, I'm very happy so far with the result on my first milling. I've milled the Platinum Garlic by 4C Labs for later, its very fluffy to the touch moreso compared to a grinder, it was a lot easier using it on my hands, wrists and shoulders. I've not tried it through the Ruby yet but will do soon

 

[Dooby Doo]

Just recieved this Mill today, 55mm, I'm very happy so far with the result on my first milling. I've milled the Platinum Garlic by 4C Labs for later, its very fluffy to the touch moreso compared to a grinder, it was a lot easier using it on my hands, wrists and shoulders. I've not tried it through the Ruby yet but will do soon

I milled 0.7g

 

[node]

Just recieved this Mill today, 55mm, I'm very happy so far with the result on my first milling. I've milled the Platinum Garlic by 4C Labs for later, its very fluffy to the touch moreso compared to a grinder, it was a lot easier using it on my hands, wrists and shoulders. I've not tried it through the Ruby yet but will do soon

Brilliant thanks for this.

 

[Dooby Doo]

This Mill so far is excellent. I tried the Platinum Garlic last night through the Ruby after Milling it, what I noticed was the Vortex in my bowl was a lot better than grinding the flower up, I found inhaling was a lot smoother too. I'm still playing around with the Mill, I am very happy so far with it.

 

[node]

This Mill so far is excellent. I tried the Platinum Garlic last night through the Ruby after Milling it, what I noticed was the Vortex in my bowl was a lot better than grinding the flower up, I found inhaling was a lot smoother too. I'm still playing around with the Mill, I am very happy so far with it.

Brilliant. I think many struggle with their hands + this peformance at this price fab.

 

[Dooby Doo]

Brilliant. I think many struggle with their hands + this peformance at this price fab.

The one I have is definitely worth buying, don't know how long it'll last but it seems pretty solid, I think the only thing I've seen that might go is the thread on the see through chamber, its the only plastic part and its a metal thread onto a plastic thread putting it together, the plastic thread seems solid so it could last a good while . With discounts and under a tenner its definitely worth having and its definitely shown me what these £60+ Mills are all about.

 

[node]

The one I have is definitely worth buying, don't know how long it'll last but it seems pretty solid, I think the only thing I've seen that might go is the thread on the see through chamber, its the only plastic part and its a metal thread onto a plastic thread putting it together, the plastic thread seems solid so it could last a good while . With discounts and under a tenner its definitely worth having and its definitely shown me what these £60+ Mills are all about.

I got this one dooby


Think it came from amazon bit small for my hands and not grippy enough but I like the clear bit - reminds me lol.
It was about £12. Excuse dirty table I live alone but normally cleaner lol.

 

[Dooby Doo]

I got this one dooby


Think it came from amazon bit small for my hands and not grippy enough but I like the clear bit - reminds me lol.
It was about £12.

That's a decent price, mine was £8.22 with discounts, how is the thread holding out on the chamber?

 

[node]

That's a decent price, mine was £8.22 with discounts, how is the thread holding out on the chamber?

Fine just checked it and trust me that grinder never stop lol.

 

[JDVaper]

Just recieved this Mill today, 55mm, I'm very happy so far with the result on my first milling. I've milled the Platinum Garlic by 4C Labs for later, its very fluffy to the touch moreso compared to a grinder, it was a lot easier using it on my hands, wrists and shoulders. I've not tried it through the Ruby yet but will do soon

How are you finding it still ? Have you been looking at anything else also ? I'm starting to struggle a little more these days so looking for something easier on the hands !

 

[Dooby Doo]

How are you finding it still ? Have you been looking at anything else also ? I'm starting to struggle a little more these days so looking for something easier on the hands !

The Mills are excellent mate, definitely easier on the hands and wrists. There are cheap ones which i have and the expensive ones, I haven't tried out. Its going great still with no issues

 

[GrownHealth]

How are you finding it still ? Have you been looking at anything else also ? I'm starting to struggle a little more these days so looking for something easier on the hands !

The Mills are excellent mate, definitely easier on the hands and wrists. There are cheap ones which i have and the expensive ones, I haven't tried out. Its going great still with no issues

The copied version of the mill we bought is heavier than the originals and just that bit harder to use but not a deal breaker and much easier on the hands to use than a conventional grinder .

 

[joint_account]

How are you finding it still ? Have you been looking at anything else also ? I'm starting to struggle a little more these days so looking for something easier on the hands !

I think a mill type is probably the best option If you need a bit of grinding assistance.

My hands are a bit battered through years of boxing, MMA and American Football. I struggle with regular grinders when they start sticking and things like that.

I haven't yet felt the need to look at anything like a Mill but in the vein of "anything else" I thought I'd throw my grinder in for consideration.

I picked up a headchef, lady chef cube grinder a while back and I've never looked at anything else since. It's still a manual grinder but cubed for grip and it's all magnetic, no screw threads outside of the kief catcher filter mesh.

I'm probably not qualified to talk about it's usage if you need some real support, but as someone who has some issues on a fairly regular basis I've found it really helpful for me.