Extracts Phant IC T55 Resinous Organic Extract Ice Water Granulate

[OldBloke]

Tested the Blob in the Yocan Orbit, as it's not pressed hash nor crumble it may be just an unholy marriage that may work.

Blob of blob about 2 uncooked rice grains, small! in the Orbit. Do not leave it set to mid temp or accidentaly double press for preheat. Fingers!

Instant glass full of vapour that I had to get, hootttt. Pulsed to clear the rest. Mmm near combusted, with 2 rice grains near charred I am impressed, has changed my pissed off mood to giggly. Pain gone, hands I don't give much of a shit.

Now to see if I can walk better after ... a bit.

So it works but set to lowest temp white, do not preheat, pulse the button until vapour appears, suck, repeat. Oooo. PS It cleans up ok if a little warm, iso, iso wipe etc, but do have spare coils!

Don't try the "Kief" Phant TC this Yocan, it will be a mess.

 

[Dooby Doo]

Tested the Blob in the Yocan Orbit, as it's not pressed hash nor crumble it may be just an unholy marriage that may work.

Blob of blob about 2 uncooked rice grains, small! in the Orbit. Do not leave it set to mid temp or accidentaly double press for preheat. Fingers!

Instant glass full of vapour that I had to get, hootttt. Pulsed to clear the rest. Mmm near combusted, with 2 rice grains near charred I am impressed, has changed my pissed off mood to giggly. Pain gone, hands I don't give much of a shit.

Now to see if I can walk better after ... a bit.

So it works but set to lowest temp white, do not preheat, pulse the button until vapour appears, suck, repeat. Oooo. PS It cleans up ok if a little warm, iso, iso wipe etc, but do have spare coils!

Don't try the "Kief" Phant TC this Yocan, it will be a mess.

It should work perfectly with my Utillian 6 ok if its works well with the Yocan Orbit I definitely wouldn't use the TC in the Utillian 6 wrong vaping product for it

 

[OldBloke]

It should work perfectly with my Utillian 6 ok if its works well with the Yocan Orbit I definitely wouldn't use the TC in the Utillian 6 wrong vaping product for it

It does melt, but leaves a residue if the oils are succesfully gone. Cleans out OK if cleaned before it cools. So to minimise hassle I'll try a wee pad of hemp fibre at the bottom of the bowl, which is quartz and bucket type so the material never touches the metal coil, a much better way imho.

 

[Dooby Doo]

It does melt, but leaves a residue if the oils are succesfully gone. Cleans out OK if cleaned before it cools. So to minimise hassle I'll try a wee pad of hemp fibre at the bottom of the bowl, which is quartz and bucket type so the material never touches the metal coil, a much better way imho.

I use a very light sandpaper to clean any residue. I wipe with iso first with a cotton bud and leave a bit of iso in the quartz cup, rip a small piece of sandpaper, pop it rough side down, I have a extract rod and use that to gently rub away any residue. Works perfectly and your quartz cup is new again

 

[OldBloke]

I use a very light sandpaper to clean any residue. I wipe with iso first with a cotton bud and leave a bit of iso in the quartz cup, rip a small piece of sandpaper, pop it rough side down, I have a extract rod and use that to gently rub away any residue. Works perfectly and your quartz cup is new again

Sounds like a cabinet makers tip If it gets that bad I'll do that, thanks. Got it clean with iso wipes, a silicon dab stick ( hard) then iso and c bud. I'll be much more careful in future, I'd prefer a device that has bucket coil and total temp control 1c, I think Yocan used to sell one.

PS I managed to char the hemp fibre so it had reached at least 240c What an iriot.

 

[Dooby Doo]

Sounds like a cabinet makers tip If it gets that bad I'll do that, thanks. Got it clean with iso wipes, a silicon dab stick ( hard) then iso and c bud. I'll be much more careful in future, I'd prefer a device that has bucket coil and total temp control 1c, I think Yocan used to sell one.

PS I managed to char the hemp fibre so it had reached at least 240c What an iriot.

My coil/ heating element it sits on the underside of the quartz cup, nothing touches the heating element/Coil when you load your cup, it heats the cup on the underside. I'm going for the Utillian 8 V2, not the turbo, not needed. I've Just got to get a few bills out the way the next few months and it'll be my Desktop for Concentrates and the Utillian 6 for on the go.

 

[OldBloke]

My coil/ heating element it sits on the underside of the quartz cup, nothing touches the heating element/Coil when you load your cup, it heats the cup on the underside. I'm going for the Utillian 8 V2, not the turbo, not needed. I've Just got to get a few bills out the way the next few months and it'll be my Desktop for Concentrates and the Utillian 6 for on the go.

As do the Orbit coils. That Utilian 8V2 is impressive, German designed I think.

 

[S.O.H™]

I feel naive here.

 

[Dooby Doo]

I feel naive here.

When do you think you'll get some mate?

 

[S.O.H™]

When do you think you'll get some mate?

...is it even availble? I haven't been looking, to be honest, Scoobz. No point, no money son! Green Karat cleaned me out...

 

[Dooby Doo]

...is it even availble? I haven't been looking, to be honest, Scoobz. No point, no money son! Green Karat cleaned me out...

Yes Medicann still have both of them, there's more to come soon anyway

 

[Bayo]

I have a Venty and a ball vape. Should I get something else to get the best out of it?

It’d have to be a budget option for now.

 

[Dooby Doo]

I have a Venty and a ball vape. Should I get something else to get the best out of it?

It’d have to be a budget option for now.

I think @Lank72 has a Venty and he's been using that

 

[Lank72]

I think @Lank72 has a Venty and he's been using that

Yeah venty and a rattler I used, but it should be fine with the normal head.

I used the wire drip pad to have the hash on its own, or sandwiched it between some bits of flower to keep it in place.

Shortly about to try it with the volcano Hybrid whip connected to a chugger, this time in a CBD flower sandwich...