Vapes Changing Dosing Capsules

[Dooby Doo]

Good find by the way Dooby Doo if these are the quality i think they are it will improve the mighty i think ss might hold more heat than aluminium? I always say dont judge a Mighty by putting in flower anyways. Judge it when you are loading a stainless steel capsule with a concentrate ideally kief.

Being Stainless Steel they do hold the heat longer than aluminium

 

[Dooby Doo]

Yeah i am not tossing these bad boys! The bundles the only real way to buy them £7 each isnt good when the caddy and 5 are 28.

Great price, I think they will sell well and come down in price again

 

[JR52]

Just had a vape with a dosing capsule with a lid on for the first time was not that good.
So I took the lid off and it is well better

 

[Dooby Doo]

Just had a vape with a dosing capsule with a lid on for the first time was not that good.
So I took the lid off and it is well better

I've not tried them with the cap off just incase debris gets sucked into the airway, I'll give it a go

 

[Dooby Doo]

Just tried it and I found it a bit gritty?

 

[JR52]

Oh my plenty has a fine gauze below the pipe to avoid this.
Thought you could use the mighty direct into a porcelain bowl

 

[Dooby Doo]

Oh my plenty has a fine gauze below the pipe to avoid this.
Thought you could use the mighty direct into a porcelain bowl

I've got the Crafty+ and it's fine mesh, I don't use my flower straight into it as this method with mine, long term, damages the heating element. That's why I use capsules as there is less debris to clean away off the meshing. It's a quick brush away after Finnishing the capsule, prolongs the life of the gadget, they aren't cheap to replace lol

 

[JR52]

Yes sounds like you do the right thing I don’t really like them to be honest

 

[GrownHealth]

Seen SmackSalad do it with just the lid over the flower ,no under part of the cap.

 

[Dooby Doo]

Yes sounds like you and the right thing I don’t really like them to be honest

You can't beat a good Joint though lol . I'm still just going through the process of transferring to vaping. I didn't like at first 4/5yrs ago, I was using the pax3 then, I couldn't get use to it. I've only just recently got onto the Storz and Bickle products and I've started enjoying them to be honest and I'm buying different accessories to enjoy the experience more. I had a joint of High Silver yesterday morning first thing, nice and pleasant high. I tried it through the Crafty+ about 185/190°c a bit later and it blew me away for a bit, a lot stronger effect through a vapourizer. I don't know if this effects everyone in this way as it did to me. Nice though

 

[GrownHealth]

You can't beat a good Joint though lol . I'm still just going through the process of transferring to vaping. I didn't like at first 4/5yrs ago, I was using the pax3 then, I couldn't get use to it. I've only just recently got onto the Storz and Bickle products and I've started enjoying them to be honest and I'm buying different accessories to enjoy the experience more. I had a joint of High Silver yesterday morning first thing, nice and pleasant high. I tried it through the Crafty+ about 185/190°c a bit later and it blew me away for a bit, a lot stronger effect through a vapourizer. I don't know if this effects everyone in this way as it did to me. Nice though

Glad you like the high silver ,and yes you cant beat a good old joint ,but just in the process of taking smacksalads advice with the cap lid only ,with the runtz og .

 

[Dooby Doo]

Seen SmackSalad do it with just the lid over the flower ,no under part of the cap.

Yes I know what you mean. I try not to get debris on the meshing above the heating element as they are very difficult to clean properly and just replacing the meshing is difficult and you could damage the heating element in the process. That's just me though

 

[GrownHealth]

Just started at 185 an a bit harsh.

 

[Dooby Doo]

Just started at 185 an a bit harsh.

I've just acquired a bong attachment and use it for higher temps because of that, it's a lot better and smooth

 

[GrownHealth]

I've just acquired a bong attachment and use it for higher temps because of that, it's a lot better and smooth

Emmm , I'm considering some sort of attachment that takes me further away from the source of heat, but i know I'm a sucker for these things and will probably end up getting one of them twist things that lots are using now eventually.

 

[Dooby Doo]

Emmm , I'm considering some sort of attachment that takes me further away from the source of heat, but i know I'm a sucker for these things and will probably end up getting one of them twist things that lots are using now eventually.

I just tried uploading a picture of my set up but I need to resize the picture

 

[GrownHealth]

Been through these battles for the last month ,then sussed out what to do on a kindle ,then changed to a laptop and had to start again

 

[Muiredach]

I just tried uploading a picture of my set up but I need to resize the picture

Did you hit the maximum dimensions for the image? I can revise it.

 

[Dooby Doo]

 

[Dooby Doo]

View attachment 300View attachment 304

That's the 18mm glass attachment with no water if I want water in it I have a 14mm tube with a 14mm glass attachment