Vapes Ruby Twist

[Moon]

Mate I looked and my mind just boggles with it ,I had a look at yours and couldn't find it on ebay but I think I need to understand the differences between one type and another and it'll probably be a month or so before I can look at a Ruby Twist now so I'll get them together and it's something to look forward too and I'm more than pleased with the way things are going on the equipment front and by getting the pen it's the best way to use the extract till I get a ruby twist

The glass is totally mind boggling! I took me hours to realise a Nail was a glass bowl and not a metal spike!!

So i ordered a Chuga as the base of the glassware but with an 18mm female attachment point (14mm was out of stock) but as the ruby comes with some stuff in the kit, not ordering a nail in case it comes with one. recommendedvapesupplies is where I ordered the Chugga, and they also sell a
Thermal/Ruby Twist Microdose Diffuser Bowl (also fits Tinymight) for 22 but not sure if i will need or if the ruby kit has one https://recommendedvapesupplies.co....79756&pr_ref_pid=7913542418668&pr_seq=uniform

 

[Moon]

Will you borrow me your press and I'll let ya borrow my Ruby twist . Gutted I haven't one yet but it won't be long, hopefully. Thinking of selling my new crafty+ to get my press, I could just use a pen for out and about.

Deal!!

 

[GrownHealth]

The thing is as well does it have to be a 4kg press as having used it for the amounts it's meant for I don't think it has to be 4 tonne but it's early days and just thinking how cheap one could be got for that is suitable.

 

[Moon]

The thing is as well does it have to be a 4kg press as having used it for the amounts it's meant for I don't think it has to be 4 tonne but it's early days and just thinking how cheap one could be got for that is suitable.

How much can we put in the press at one time? They are just bottle jacks and two heated plates, simple really.

 

[Dooby Doo]

The glass is totally mind boggling! I took me hours to realise a Nail was a glass bowl and not a metal spike!!

So i ordered a Chuga as the base of the glassware but with an 18mm female attachment point (14mm was out of stock) but as the ruby comes with some stuff in the kit, not ordering a nail in case it comes with one. recommendedvapesupplies is where I ordered the Chugga, and they also sell a
Thermal/Ruby Twist Microdose Diffuser Bowl (also fits Tinymight) for 22 but not sure if i will need or if the ruby kit has one https://recommendedvapesupplies.co.uk/products/thermal-ruby-twist-microdose-diffuser-bowl?pr_prod_strat=jac&pr_rec_id=23598b190&pr_rec_pid=8443097579756&pr_ref_pid=7913542418668&pr_seq=unifo

You do get the Microdose bowl as standard as well as the normal bowl with Puffinmaster. I've seen other sites now following suit, as you had to buy the Microdose bowl separately £22+. I've ordered the Titanium Matrix bowl as that wasn't included with the kit.

Deal!!

Where do ya live? Lol

 

[Dooby Doo]

The thing is as well does it have to be a 4kg press as having used it for the amounts it's meant for I don't think it has to be 4 tonne but it's early days and just thinking how cheap one could be got for that is suitable.

You only needed a 1 ton for personal really but you should get a better return not much.

 

[GrownHealth]

How much can we put in the press at one time?

I was told about 3,5 g but I'm not sure in one go.
It is a bottle jack with two heated plates and I'm sure @Turnster got his for a nifty.

 

[Ben710]

View attachment 2252View attachment 2253View attachment 2254
Bong has just arrived, made up with it. Can anybody let me know what the bubble thing is and how it's used, I've not seen this before with a bong?

The bubble thing is a carb cap for dabbing extracts. You heat up the banger with a blow torch, wait for it to hit desired temp. Then drop a dab of extract in and put the short end in the top of the banger, so it sits on the ball part. Then start pulling on the bong. You can then move it around to direct the air flow around the banger to move the extract around. This stops it sitting in one place and gives a more even rip. ✌

 

[Moon]

Nice little article on rosin press temps etc, I will work from this.

Expert Guide to Rosin Press Temperatures

Finding the right temperature is key when using a rosin press. The ideal temperature depends on a number of factors, from the type of starting material you’re working with to the type of consistency/texture you want to achieve. If your extractions aren’t meeting your expectations, there’s a good...

gopurepressure.com

 

[GrownHealth]

The bubble thing is a carb cap for dabbing extracts. You heat up the banger with a blow torch, wait for it to hit desired temp. Then drop a dab of extract in and put the short end in the top of the banger, so it sits on the ball part. Then start pulling on the bong. You can then move it around to direct the air flow around the banger to move the extract around. This stops it sitting in one place and gives a more even rip. ✌

Cheers for clearing that up and it's staring to make sense a bit but a lot to learn still on this subject for me equipment wise.

 

[Dooby Doo]

The bubble thing is a carb cap for dabbing extracts. You heat up the banger with a blow torch, wait for it to hit desired temp. Then drop a dab of extract in and put the short end in the top of the banger, so it sits on the ball part. Then start pulling on the bong. You can then move it around to direct the air flow around the banger to move the extract around. This stops it sitting in one place and gives a more even rip. ✌

Thankyou very much, I thought it was for the extract bowl but wasn't sure. I love the word "Banger" for it, I only come across it with regards to bongs last night

 

[Dooby Doo]

I was told about 3,5 g but I'm not sure in one go.
It is a bottle jack with two heated plates and I'm sure @Turnster got his for a nifty.

You can press an ounce with it easily

 

[GrownHealth]

You can press an ounce with it easily

 

[Dooby Doo]

You'll be able to do smaller amounts no problem, you do get a better return with smaller amounts than using a 1 ton press. Flower depending.

 

[GrownHealth]

Really didn't think it was capable of that with 4 and a half inch plates and not needed for me but also looking at the expert guide to rosin temps I'd prefer lower temps in future as it looks a lot better but the proof is in the effects I suppose .

 

[Moon]

Really didn't think it was capable of that with 4 and a half inch plates and not needed for me but also looking at the expert guide to rosin temps I'd prefer lower temps in future as it looks a lot better but the proof is in the effects I suppose .

Another site on the temps, best to compare a couple. https://thepressclub.co/blogs/tips-tricks/rosin-press-temperature-guide

 

[Dooby Doo]

Really didn't think it was capable of that with 4 and a half inch plates and not needed for me but also looking at the expert guide to rosin temps I'd prefer lower temps in future as it looks a lot better but the proof is in the effects I suppose .

Depends on the flower too

 

[MigraineMan]

Thankyou very much, I thought it was for the extract bowl but wasn't sure. I love the word "Banger" for it, I only come across it with regards to bongs last night

Quartz bangers FTW

 

[Moon]

Depends on the flower too

And on the flower moisture content. Some sites say 62% is cool, others are saying take the flower upto 72% boveda then press. Cant see 10% making that much difference, but time will tell!

 

[Moon]

The size of our micron bags will also dictate the amount of flower in 1 press.